Accessories

Spigot Mount Brackets

LMS manufacture a range of Spigot Mount Brackets for lighting and associated equipment. From generic mounting options to custom mounting brackets designed to suit specific light fitting/equipment to be installed.  Popular brackets used in conjunction with LMS standard range of poles shown, contact to discuss specific site requirements. Brackets are available in either HDG finish or 316 Stainless Steel.

Disclaimer: Mounting hole dimensions of LMS-spigot mounting brackets are based on information provided by lighting manufacturer at time of bracket design. Light Mounting Systems Australia is not responsible for any subsequent changes to the light/light fitting which may affect bracket suitability.

Spigot Mount Brackets » mount brackets

Proudly Australian Made, with an extensive range of standard configurations or the ability to design and manufacture a solution specific for your sites requirements

Suitable For:

Versalux ebh / eaton endure foot mount spigot mount bracket

SB-10

Suits:

  • Versalux EBH and Eaton Endure foot mount light fitting
  • 25NB (33.7mm approx. OD) pipe mount
  • LMS113, LMS112, LMS040

Durosite LED wallpack / bulkhead spigot mount bracket

SB-14

Suits:

  • Dialight Durosite LED wallpack/bulkhead light fitting
  • 25NB (33.7mm approx. OD) pipe mount
  • LMS113, LMS112, LMS040

Thorn dn bulkhead spigot mount bracket

SB-27

Suits:

  • Thorn DN bulkhead light fitting
  • 25NB (33.7mm approx. OD) pipe mount
  • LMS113, LMS112, LMS040

Generic flat bar flood mount

SB-7

Suits:

  • Small LED style flood lights – Trunion Arm Mount
  • 25NB (33.7mm approx. OD) pipe mount (Ubolt)
  • LMS113, LMS112, LMS040

Generic flood mount (fixed orientation)

SB-30

Suits:

  • Floodlight type fittings – Trunion Arm Mount
  • 25NB (33.7mm approx. OD) Pipe Mount (Ubolt)
  • LMS113, LMS112, LMS040

Generic flood mount (variable position)

SB-42

Suits:

  • Floodlight type fittings – Trunion Arm Mount
  • Radial slots allow mounting of flood at varying orientations
  • 25NB (33.7mm approx. OD) pipe mount (ubolt)
  • LMS113, LMS112, LMS040

700mm 32nb generic fluoro / Batten spigot mount bracket (inc fluoro mounting feet)

SB-16

Suits:

  • Fluoro/Batten type fittings
  • 25NB (33.7mm approx. OD) pipe mount
  • LMS113, LMS112, LMS040

1400mm 32nb generic fluoro / batten spigot mount bracket (inc fluoro mounting feet)

SB-18

Suits:

  • Fluoro/Batten type fittings
  • 25NB (33.7mm approx. OD) pipe mount
  • Enquire about LMS braced outreach poles to suit SB-18
  • LMS113 FLUORO, LMS112 FLUORO, LMS040 FLUORO
Spigot Mount Brackets » mount brackets

Custom Lighting / Other

Contact LMS to discuss light mounting bracket requirements

contact

Spigot Mount Brackets » mount brackets

Surveillance / Camera

Contact LMS to discuss Surveillance/Camera mounting bracket requirements


contact

Spigot Mount Brackets » mount brackets

Alarms

Contact LMS to discuss Alarm mounting bracket requirements

contact

Spigot Mount Brackets » mount brackets

Networking

Contact LMS to discuss Network Device mounting bracket requirements

contact

Spigot Mount Brackets » mount brackets

Instrumentation

Contact LMS to discuss Instrumentation mounting bracket requirements

contact

DISCLAIMER

It is the responsibility of Light Mounting Systems Australia customers to carry out their own independent structural assessments of the existing handrailing/support structure to which they are proposing to attach LMS products. The structural adequacy of the handrailing/support structure to which the LMS products are affixed is not covered by Light Mounting Systems Australia design certification and as such Light Mounting Systems Australia accepts no responsibility for failure due to inadequacy of support structure.

Mounting hole dimensions of LMS-spigot mounting brackets are based on information provided by lighting manufacturer at time of bracket design. Light Mounting Systems Australia is not responsible for any subsequent changes to the light/light fitting which may affect bracket suitability.